Wellcraft V20 Community - has anyone made their own sliding cooler mount?

Page 2 of 2

Show 40 post(s) from this thread on one page

Wellcraft V20 Community (https://forums.wmpdevserver1.com/community/index.php)

- Modifications (https://forums.wmpdevserver1.com/community/forumdisplay.php?f=13)

- - has anyone made their own sliding cooler mount? (https://forums.wmpdevserver1.com/community/showthread.php?t=11232)

phatdaddy

02-13-2009 06:50 PM

bsteckel, couldn't figure out how to import pict so look at the 10 pic down on this page.
looks like starboard is the answer

http://www.thehulltruth.com/forums/t...188400&start=1

i don't know how it slides, maybe some one will go to the miami show and give you a heads up

reelapeelin

02-13-2009 07:48 PM

Quote:

Originally Posted by randlemanboater (Post 136139)

What about putting starboard under the cooler to bring it up almost level with the lip. It will slide right out without having to lift......but you would have to put a latch or something that would hold the cooler in while under way.
:beer:

Just brain stormin.

Here's yer answer..then strap that puppy in place....:clap:

RWilson2526

02-13-2009 07:51 PM

And I think you should upgrade to the quad 300's!

reelapeelin

02-13-2009 08:20 PM

Quote:

Originally Posted by bigshrimpin (Post 136144)

Brad - Take a picture of lip. If the lip is really a bar on the leaning post . . . buy a smaller cooler or cut it off and the mount blocks. The project should be .000000001 on a scale of 1 to 10 . . . Don't over complicate the issue. K.I.S.S. sliding rails under a leaning posts is not a smart idea IMO. Mount the fixed blocks and move on!! No need to spend weeks on this problem.

Hey Chum...got any extra meds floatin' about??...tha BIG needs to calm down a little...:fight: :you:

phatdaddy

02-15-2009 09:30 PM

bsteckel, heres a better pic

http://i377.photobucket.com/albums/o...16/tackle2.jpg

http://i377.photobucket.com/albums/o...s216/39_11.jpg

pic from other post

bsteckel

02-16-2009 06:05 PM

thanks for those pics phatdaddy ... that is a very nice setup.

i guess the folks at sea vee think a sliding cooler is a great idea :head:

i would have to agree.

off to the drawing board. maybe i can get this done in the garage while i wait for it to warm up a little.

it is too cold outside to mount those quad 300's i just ordered :beer:

randlemanboater

02-16-2009 10:03 PM

I always thought that if I had a center console that I would mount the cooler behind the leaning post to use as rear facing seating to use for watching trolled rigs, pulled skiers, or just admiring the Johnzuki.

But I don't know how much room you have back there so the slider may be the ticket.

All times are GMT -5. The time now is 11:00 PM.

Page 2 of 2

Show 40 post(s) from this thread on one page