Wellcraft V20 Community

Wellcraft V20 Community (https://forums.wmpdevserver1.com/community/index.php)
-   Performance (https://forums.wmpdevserver1.com/community/forumdisplay.php?f=15)
-   -   1988 V20 with 225 Honda (https://forums.wmpdevserver1.com/community/showthread.php?t=7326)

spareparts 07-13-2007 11:34 PM

Re: 1988 V20 with 225 Honda
 
mix some food coloring( make sure its coloring only, no sugar) with 1 gal of gas(use green or blue, red is hard to track in a boat, too close to fiberglass resin color) pur it into the tank and see if *and where it shows up, you can buy some florecent coloring that shows up with a black light

reelapeelin 07-14-2007 12:47 PM

Re: 1988 V20 with 225 Honda
 
Fumes huh ??? ... sounds like a dangerous situation ... I recommend you remove the E-Tec and send it to me ASAP!!...




No kiddin'...is it after filling?...do you fill to top? ...tanks topped-off can many times overflow their vents due to cold gas from ground tank EXPANDING as the gas heats up ...specially in the FL sunshine...

Check hoses for deterioration, connections for loose fit ... and if Spare's suggestion about the food coloring doesn't yield results, find a shop that can do a pressure leak-down test on your tank...keep us posted on how it goes ;) ...



jackman1939 07-27-2007 09:47 PM

Re: 1988 V20 with 225 Honda
 
Thanks for the tips guys.
The last time I went out, and returned, I did not fill 'er up all the way (maybe 5 gallons short). Have not smelled the fumes.
The E-Tec runs great !!

reelapeelin 07-27-2007 11:25 PM

Re: 1988 V20 with 225 Honda
 
Quote:

Originally Posted by jackman1939
The E-Tec runs great !!



You a DAWG!! ;D ;D ;D...


All times are GMT -5. The time now is 10:52 PM.

Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.