Wellcraft V20 Community - 21 FT Project Boat Part 1 Getting Close

Wellcraft V20 Community (https://forums.wmpdevserver1.com/community/index.php)

- Off Topic (https://forums.wmpdevserver1.com/community/forumdisplay.php?f=14)

- - 21 FT Project Boat Part 1 Getting Close (https://forums.wmpdevserver1.com/community/showthread.php?t=5978)

Re: 21 FT Project Boat Update

DA sanded with 40 grit paper, then rolled with epoxy 2 part primer all over, then palm sanded smooth with 80 grit and then sprayed with toplac Brighter Bright white. Next going tosand with palm and 220 grit and put a final coat on the ol girl.

Re: 21 FT Project Boat Update

Spent the day wiring the whole boat and tested all wiring, drilled and counter sunk all the holes, mounted all the cleats, lights, and bilge pumps. then took them off and coated all the holes with epoxy so no fear of rot later and now is ready for a final sanding and the coat of paint.

Re: 21 FT Project Boat Update

some wired pics

Pic of location of a deck lamp to light the floors
http://i8.photobucket.com/albums/a46...21Boat-100.jpg

http://i8.photobucket.com/albums/a46...21Boat-096.jpg

AnchorLight location
http://i8.photobucket.com/albums/a46...21Boat-098.jpg

Bilge pump and float switch wired
http://i8.photobucket.com/albums/a46...21Boat-099.jpg

Under dash where fuse panel and wiring will end up once complete
http://i8.photobucket.com/albums/a46...21Boat-101.jpg

Re: 21 FT Project Boat Update

finally worked on the boat today. UGH been a long week the Tahoe's Diesel died last Sunday night coming home from the coast so spent the week fixing it and getting all the crap back under the hood an over $400 later it's running on all 8 cylinders again. Then the d@mn John Deere transmission broke spent yesterday working on it ugh.

So I hated how this boat's dash was flat and the gauges couldn't been seen without standing up so i built a dash and installed a set of pop up cleats. PS they are a pain in the a$$ to install, glad i fit it before the final coat of paint. Filled the old gauge holes in the dash here's pics

http://i8.photobucket.com/albums/a46...21Boat-102.jpg

http://i8.photobucket.com/albums/a46...21Boat-103.jpg

http://i8.photobucket.com/albums/a46...21Boat-104.jpg

http://i8.photobucket.com/albums/a46...21Boat-105.jpg

http://i8.photobucket.com/albums/a46...21Boat-106.jpg

http://i8.photobucket.com/albums/a46...21Boat-107.jpg

http://i8.photobucket.com/albums/a46...21Boat-108.jpg

http://i8.photobucket.com/albums/a46...21Boat-109.jpg

http://i8.photobucket.com/albums/a46...21Boat-110.jpg

http://i8.photobucket.com/albums/a46...21Boat-111.jpg

http://i8.photobucket.com/albums/a46...21Boat-112.jpg

http://i8.photobucket.com/albums/a46...21Boat-113.jpg

Re: 21 FT Project Boat Update

Pretty crafty on the guage modification! She's coming along!

Re: 21 FT Project Boat Update

Yo Skools!!...great work, Man ;) ...no doubt I envy your fiberglass talents...you got it goin' ON!! ;D ;D...

Re: 21 FT Project Boat Update

Thanks There, Come on over we'll have some glass fun in the shop lol

Re: 21 FT Project Boat Update