View Full Version : Best finishes for gel coat
willy
02-23-2008, 12:41 PM
My friend wants to do a nice job on his Maycraft 2550 Pilot in a few weeks. We have been hearing things about not using wax on the boat as it eats into the thin outer finish of the gel coat and eventually causes it to be porous and becomes self defeating. Kinda makes sense as wax has abrasives in it.
The question is this, what other polymer or other type finishes are you guys using on your boats?
garagenc
02-23-2008, 12:58 PM
I may not understand what your ? is, but if you want to know what we use on gelcoat, I use Poliglow. They make a cleaner that you clean the hull with and then brush or roll the poliglow on. One bottle will let you put 3-4 coats on the first time and that will leave you about 1/2 the bottle left.
I think it's some of the best hull cleaner and protector.
Here's the web address www.Poliglow.net (http://www.Poliglow.net)
garage :hi:
macojoe
02-23-2008, 01:27 PM
Bleach and water for me! :hide:
kamikaze
02-23-2008, 05:21 PM
Willy:
In my opinon -fully sythentic is the only way to go. I personnally like Mothers FX. Very easy to apply and wipe off, but still stands up well to the weather and Wal-Mart has it for $8.00 a bottle in my area.
Make sure you apply in thin coats not heavy. Gelcoat has small peaks and valleys which need to be filled slowly making a smooth surface. Don't try to golb the stuff on - multiple thin coats and slowly build up the surface. (You'll know when the surface is build up becasue it becomes easier to wax and wipe off over time). Here a picture of a 26 year old boat that's never- ever been stored in side! If you look close at the rod holder up front you can see the reflection of the rod off the gel coat. Be careful though. It' s sticker than you how what when it gets wet!
I have used Poliglow lbut in the long run I wasn't happy with it. It to like wax will wear off and mine began to turn yellow with age. If your gelcoat in good conditon, a full sythenic wax is all that's needed.
http://members.cox.net/douggross/wax.jpg
Kamikaze
macojoe
02-23-2008, 08:06 PM
I just want to know one thing!! What the heck kind of face were you going for there?? :you:
willy
02-28-2008, 11:10 PM
thanks I will let him know about mothers fx
Bygracealone
02-29-2008, 12:08 AM
I just want to know one thing!! What the heck kind of face were you going for there?? :you:
Yeah Kamikaze, you had me crackin' up with the expression on your face. Looks like you were kidding around... good times... killer fish there buddy.
kamikaze
02-29-2008, 02:17 PM
Bygracealone:
I just shrug off MJ comment as "the pot calling the kettle black! Actually, it was cold as all get out that day and I just busted my knuckles on the fish locker pulling out that fish. Good thing you didn't heard the audio that went along with that pciture.
Kamikaze
mpcalfa2
02-29-2008, 08:31 PM
I don't know, I'd check my drawers after a face like that!
macojoe
02-29-2008, 10:44 PM
LMFAO!!!!!!!!!!!:hi:
vBulletin® v3.8.2, Copyright ©2000-2025, Jelsoft Enterprises Ltd.