Stinkys video repairs thread....

[Stinky_Hooker]

Alright guys, instead of separate ones I will keep them all on one thread. I will move the other videos and responses over here ahead of this one when I get time.

Here is the latest. Hope you like! :D

transomsmall.wmv (http://www.zippyvideos.com/1295695703893696/transomsmall/*stinkyhooker)

[Franco]

That was really tender Stink, I was in tears!

[Stinky_Hooker]

Will you hold me? ;D

[macojoe]

nice video, But the stuff in my underware is more solid then that!!

[Stinky_Hooker]

nice video, But the stuff in my underware is more solid then that!!


Is it because you are happy to see me? ::)

[cliffpaul2]

I enjoyed it!

[willy]

I'll tell ya StinkMan you might of missed your callin, Film is where you should have been, I might have to call you Hollywood, nah can't insult you like that. Just keep them moving pictures comin son, and I love your eye protection ;)

[TheTinMan]

Stink, so glad you decided to do the transom the right way. You should also consider adding some knee braces from the new transom to the stringers to make it even more solid...I'll try and find some pics of what I'm talking about.


Here's a few:

http://img.photobucket.com/albums/v206/Mnutz/000_0067.jpg

http://img.photobucket.com/albums/v206/Mnutz/tran2.jpg

http://img.photobucket.com/albums/v206/Mnutz/tran3.jpg

[TheTinMan]

Stinky. another thing I would do if I was you. Instead of doing your livewells the way your talking about, since you have to build a transom cap, can't you make it wide enough to fit the livewells in it so they are parallel with transom??? One of the major benefits to me with a closed transom and bracket is all the extra cockpit space you gain.

[Stinky_Hooker]

Tinman, on the knee braces THANKS! I will definitely do that. The old ones are kinda pitiful.


The parallel thing....I could, but I was tring to prevent cutting the angled from section and keep all the original flooring ya know?


No I am thinking though, that extra room would be nice. ???

[msbhammer]

Damm Stinky,
I couldnt watch the new video for some reason :'(
I even had my wife stand here in her panties and bra, to kinds put me in the same realm with you ;D ;D

[CapnBill]

Here is today's question ???

WHERE ARE THE Sunday - STINKY - SMOKER - SCENES???

It's freezin up here today an we all need to see you prancing around in your tee shirt !

... that troubler-maker, wise-guy, smart - a$$ ..c-bill

P.S. how is the transom - hope it is going well -
words of advice ... dry-fit .. dry-fit... and dry-fit some more the wood before you goop the glue....

[Stinky_Hooker]

I didnt get to fool with it this weekend Bill. It rained all day sat. I have a club fishin tourney next weekend so I worked today on getting tackle and such ready for that. I hope to piddle with it this week some.

Yes DRYFIT will take place many times before the gluing does. I am going to try to incorporate a "shim" for the bracket into it while Im doing it. My bracket is straight and as yall know the V20 has a curved transom. This will all take a little time, but I think it will be worth it in the end. 8)

[macojoe]

Shim will be nice!! I think mine was about 1 1/2 or 1 3/4 ?? I ended up cutting a 4X4 wedge for each side. worked out well so far. you can see it in the gallery pic's, but not well, this was before I really started taking pic, when I did things.

[Stinky_Hooker]

Well guys I got the first piece of plywood cut to fit the inside of the transom Saturday...sorry no video. Ill post a few pics when I get home. I looks like I am going to have to cut the pieces to get them in. They wont fit whole. I have decided to cut them kinda like a 60/40.....sorta like a *pickup truck seat is done. I will cut each board on the opposite side as the previous so they lap together more solid. Ill post a few pics later to show yall.

[willy]

Stink Man can you mill down an overlap and epoxy it once you slide them together. Before you cut the final product add 4 inches to your width measurement and use a table saw to rduce corresponding ends by half your board thickness for an overlap.?

[Stinky_Hooker]

I read that 10 times before I got it. EXCELLENT IDEA! I may do that! I can use my first attempt as a pattern since it is too short now. 8)

[willy]

I probably could have explained it better, I was in a hurry, sorry brother. But stick with me eventually I will make sense ;D

[Blue_Runner]

BTW Stink I finally saw this video over the weekend and it was AWESOME! GREAT JOB! Funny as crap man!

The other one's I still couldn't see or hear, and one I could see but not hear ???

We need a Video section in our gallery I do believe!

P.S. What editing software did you use with the video?

[Stinky_Hooker]

windows movie maker...love it. it will do all kinds of stuff, I havent really used it to its potential yet, just learning is all.

[Kajun]

Great video Stinky! funny as hell!

[Vic]

Stinky, I like the 60/ 40 idea if the sixty part passes the outboard bolt holes. Even on my bracket there are a bunch of bolts around where the motor is or would be on the transom. Then half lap that joint 60/40 like Willy said. Unless yall are talking horizontal instead of verticle. In that case you lost me.

[Franco]

Stinky check out these links

http://en.wikipedia.org/wiki/Scarf_joint

http://www.glen-l.com/supplies/pxman-apscarf.html


http://www.glen-l.com/wood-plywood/scarf-butt.html

[steelheader13]

Stinky, I also enjoyed the video, you goofy S.O.B.

Except the part about the big guns. Would rather see the wifes big 'uns. LOL

Also, your hair was a little longer than regulation, you need to go see Floyd. Or is that a prison cut?

Great work on the boat, you are ambitious, that hull will give you a lot of satisfaction when you are finished.

Keep up the good work!

[Stinky_Hooker]

OK guys here is a little update. I havent gotten alot done because I have been painting my house...yay!! ::)


No video cause my wife ( I blame her anyways) lost the charger for my mini DV...I think she is hiding it cause my solo videos to random guys on the net scare her. ::) I ordered one off Flea-Bay and itll be here in a bit. 8)

I have gotten the first layer split 60/40 as "someone" reccomended glued on. I have also planed down a "splice" to go between them. I am pulling it to the rear transom shell with screws through the rear. I used 1/4" plywood on this first layer because I tried 1/2" and it was pulling the the shell in...deforming the transom line of the boat. I will go thicker the farher I get as Ill be able to as it stiffins with addtional layers. I have also cut the old stringers off forward of the rot and Ill be building some knee braces for those as well.

I have a few pics, but they are at home...Ill post em later.

[Blue_Runner]

Good progress. Are you sweating yet? ;D

I hung insulation over the weekend. That stuff tastes great! ::) :'(

[Stinky_Hooker]

*Are you sweating yet? *;D



Yes, but only cause you are in the room. ::)

[willy]

"Someone"
Is that all I am to you, someone to be used and tossed away with not so much as a "How you doin"
It's not my fault you wrote on your arse with a permanent marker and made all the boys jealous down there ::)

[Pipe_Dream]

No video cause my wife ( I blame her anyways) lost the charger for my mini DV...I think she is hiding it cause my solo videos to random guys on the net scare her. ::) *


um . . . understandable.

[Stinky_Hooker]

Willy...my apologies..please accept. I would be nothing without you!! I NEED you...If I didnt have you I would miss all your antics on the board..... your sweet comments.....your PM's....your late night phone calls to my house.....our trip together to Paris...OOPS...Ive said too much. :o

[willy]

;) 8) ;)