Transom Trim

[Mac_Attack]

When I replace my motor I'd like to replace the cap of the transom. *Has any one replace theirs and if so with what? *Thanks Billy Mac

Here's a photo of what I'd like to replace.

http://img.photobucket.com/albums/v130/Machockey/Trim3.jpg

[Mac_Attack]

When I replace my motor I'd like to replace the cap of the transom. *Has any one replace theirs and if so with what? *Thanks Billy Mac

Here's a photo of what I'd like to replace.

http://img.photobucket.com/albums/v130/Machockey/Trim3.jpg

[macojoe]

I don't have that piece but most are made from angle alum.
But you will not be able to duplcate the curve like that, you will have to piece it or cut it to bend it.
Whats wrong with the one you have?? Can't see any damage from the poic you showed?

[macojoe]

I don't have that piece but most are made from angle alum.
But you will not be able to duplcate the curve like that, you will have to piece it or cut it to bend it.
Whats wrong with the one you have?? Can't see any damage from the poic you showed?

[Airslot]

If I were to remove my trim, I'd get some 4" tape (glass) and some epoxy. Remove the trim, sand the area, a lay up a few layers with the glass tape. That way the the seam is sealed better to water. Before starting I'd tape off the area in a straight line, then paint when finished.

Airslot

[Airslot]

If I were to remove my trim, I'd get some 4" tape (glass) and some epoxy. Remove the trim, sand the area, a lay up a few layers with the glass tape. That way the the seam is sealed better to water. Before starting I'd tape off the area in a straight line, then paint when finished.

Airslot

[Mac_Attack]

There are some cracks in the plastic. I just thought that if the motor is removed I replace it. I know if it ain't broke don't fix it. Billy Mac ;D

[Mac_Attack]

There are some cracks in the plastic. I just thought that if the motor is removed I replace it. I know if it ain't broke don't fix it. Billy Mac ;D

[Skools Out]

here's how i fixed that 21 i'm doing it had Aluminum from factory but that gap under those covers is a spot that starts transom rot

Before

http://i8.photobucket.com/albums/a46/Skools_Out/Monoco%2021/MVC-020S.jpg

http://i8.photobucket.com/albums/a46/Skools_Out/Monoco%2021/MVC-008S.jpg

Had to do some epoxy and micro ballons repairs

http://i8.photobucket.com/albums/a46/Skools_Out/Monoco%2021/MVC-014S.jpg

http://i8.photobucket.com/albums/a46/Skools_Out/Monoco%2021/Monaco21_002S.jpg

http://i8.photobucket.com/albums/a46/Skools_Out/Monoco%2021/Monaco21_003S.jpg

http://i8.photobucket.com/albums/a46/Skools_Out/Monoco%2021/Monaco21_004S.jpg

http://i8.photobucket.com/albums/a46/Skools_Out/Monoco%2021/MVC-037.jpg

Before Epoxy Primer


http://i8.photobucket.com/albums/a46/Skools_Out/Monoco%2021/Monaco21_041S.jpg

http://i8.photobucket.com/albums/a46/Skools_Out/Monoco%2021/Monaco21_037S.jpg

http://i8.photobucket.com/albums/a46/Skools_Out/Monoco%2021/Monaco21_036S.jpg

http://i8.photobucket.com/albums/a46/Skools_Out/Monoco%2021/Monaco21_039S.jpg

http://i8.photobucket.com/albums/a46/Skools_Out/Monoco%2021/Monaco21_035S.jpg

http://i8.photobucket.com/albums/a46/Skools_Out/Monoco%2021/Monaco21_034S.jpg

After sanding the hull for primer and primed the transom.


http://i8.photobucket.com/albums/a46/Skools_Out/Monoco%2021/21Boat037.jpg

http://i8.photobucket.com/albums/a46/Skools_Out/Monoco%2021/21Boat035.jpg

http://i8.photobucket.com/albums/a46/Skools_Out/Monoco%2021/21Boat034.jpg

http://i8.photobucket.com/albums/a46/Skools_Out/Monoco%2021/21Boat042.jpg

http://i8.photobucket.com/albums/a46/Skools_Out/Monoco%2021/21Boat-095.jpg

After

After the paint on the hull and transom

http://i8.photobucket.com/albums/a46/Skools_Out/Monoco%2021/21Boat-224.jpg

[Skools Out]

here's how i fixed that 21 i'm doing it had Aluminum from factory but that gap under those covers is a spot that starts transom rot

Before

http://i8.photobucket.com/albums/a46/Skools_Out/Monoco%2021/MVC-020S.jpg

http://i8.photobucket.com/albums/a46/Skools_Out/Monoco%2021/MVC-008S.jpg

Had to do some epoxy and micro ballons repairs

http://i8.photobucket.com/albums/a46/Skools_Out/Monoco%2021/MVC-014S.jpg

http://i8.photobucket.com/albums/a46/Skools_Out/Monoco%2021/Monaco21_002S.jpg

http://i8.photobucket.com/albums/a46/Skools_Out/Monoco%2021/Monaco21_003S.jpg

http://i8.photobucket.com/albums/a46/Skools_Out/Monoco%2021/Monaco21_004S.jpg

http://i8.photobucket.com/albums/a46/Skools_Out/Monoco%2021/MVC-037.jpg

Before Epoxy Primer


http://i8.photobucket.com/albums/a46/Skools_Out/Monoco%2021/Monaco21_041S.jpg

http://i8.photobucket.com/albums/a46/Skools_Out/Monoco%2021/Monaco21_037S.jpg

http://i8.photobucket.com/albums/a46/Skools_Out/Monoco%2021/Monaco21_036S.jpg

http://i8.photobucket.com/albums/a46/Skools_Out/Monoco%2021/Monaco21_039S.jpg

http://i8.photobucket.com/albums/a46/Skools_Out/Monoco%2021/Monaco21_035S.jpg

http://i8.photobucket.com/albums/a46/Skools_Out/Monoco%2021/Monaco21_034S.jpg

After sanding the hull for primer and primed the transom.


http://i8.photobucket.com/albums/a46/Skools_Out/Monoco%2021/21Boat037.jpg

http://i8.photobucket.com/albums/a46/Skools_Out/Monoco%2021/21Boat035.jpg

http://i8.photobucket.com/albums/a46/Skools_Out/Monoco%2021/21Boat034.jpg

http://i8.photobucket.com/albums/a46/Skools_Out/Monoco%2021/21Boat042.jpg

http://i8.photobucket.com/albums/a46/Skools_Out/Monoco%2021/21Boat-095.jpg

After

After the paint on the hull and transom

http://i8.photobucket.com/albums/a46/Skools_Out/Monoco%2021/21Boat-224.jpg

[Mac_Attack]

Nice job Skools. I'm looking for a quick fix unless when the plastic is removed it uncovers a problem. Thanks Billy Mac ;D

[Mac_Attack]

Nice job Skools. I'm looking for a quick fix unless when the plastic is removed it uncovers a problem. Thanks Billy Mac ;D

[Skools Out]

you can go to Lowes and buy Aluminum Angle *and cut to fit that's what i did on this boat installed with stainless screws.

http://i8.photobucket.com/albums/a46/Skools_Out/Manatee/red_boat_24.jpg

http://i8.photobucket.com/albums/a46/Skools_Out/Manatee/red_boat_33.jpg

http://i8.photobucket.com/albums/a46/Skools_Out/Manatee/red_boat_32.jpg

[Skools Out]

you can go to Lowes and buy Aluminum Angle *and cut to fit that's what i did on this boat installed with stainless screws.

http://i8.photobucket.com/albums/a46/Skools_Out/Manatee/red_boat_24.jpg

http://i8.photobucket.com/albums/a46/Skools_Out/Manatee/red_boat_33.jpg

http://i8.photobucket.com/albums/a46/Skools_Out/Manatee/red_boat_32.jpg

[Skools Out]

or just gut it like this one i have lol

http://i8.photobucket.com/albums/a46/Skools_Out/Sea%20Ox/sea_ox_016.jpg

http://i8.photobucket.com/albums/a46/Skools_Out/Sea%20Ox/MVC-027S.jpg

[Skools Out]

or just gut it like this one i have lol

http://i8.photobucket.com/albums/a46/Skools_Out/Sea%20Ox/sea_ox_016.jpg

http://i8.photobucket.com/albums/a46/Skools_Out/Sea%20Ox/MVC-027S.jpg

[msbhammer]

SKOOL, clear your schedule, I'm sending Randleman up to ya. ;D

[msbhammer]

SKOOL, clear your schedule, I'm sending Randleman up to ya. ;D

[Skools Out]

ok cleared till Friday night i'm going Coastal to pick up another trailer don't you want a tandem Hammer come on down i'll give ya the great deal lol.


Mac you just want me to send my Girl there to fix your transom? she helped and did alot of the transom work on the 21 project she actually likes boat repairing.

[Skools Out]

ok cleared till Friday night i'm going Coastal to pick up another trailer don't you want a tandem Hammer come on down i'll give ya the great deal lol.


Mac you just want me to send my Girl there to fix your transom? she helped and did alot of the transom work on the 21 project she actually likes boat repairing.

[Stillrunning]

What school did is very nice. I use the aluminum angel stuff and cut to fit but my cap got trashed whe we took it off so I had to make something. Yours looks pretty claen I would just repair the cracks and give it a coat of pait. My transom is sealed on the top so I could leave it uncovered but it would look like crap.

[Stillrunning]

What school did is very nice. I use the aluminum angel stuff and cut to fit but my cap got trashed whe we took it off so I had to make something. Yours looks pretty claen I would just repair the cracks and give it a coat of pait. My transom is sealed on the top so I could leave it uncovered but it would look like crap.