Tac Help Skools or anyone?

[macojoe]

Can you tel me how or what color wires go to this Tac?? 1989 175 Evinrude, I have no harness for it so I will make one.

Thanks!

http://syncboard.com/albums/Boat-Tackle-Box/Picture_004.sized.jpg

http://syncboard.com/albums/Boat-Tackle-Box/Picture_013.sized.jpg

[spareparts]

should be
purple = key on 12v +
black = ground (12v -)
gray wire tach signal
dark blue = gauge light

thats the standard wire colors set by the NMMA, don't know for sure, but your 89 should be the same

[Skools Out]

well not easy to make a harness better to buy one it plugs into your controls box. the harness has 3 wires a Purple, grey, black, OMC don't use the dark blue. But buy the harness usually cost $8


Purple is power on with ignition switch

Grey is the tach sending unit wire

Black it the ground

[macojoe]

Thanks guys!!!

$8 for a harness, heck thats cheaper then buying the wire!! ;) ;D

[reelapeelin]

Thanks guys!!!

$8 for a harness, heck thats cheaper then buying the wire!! ;) ;D



...and saved me a trip out to the boat to see how mine wired to tell MJ ;D ...

[randlemanboater]

Yeah but if you make your own harness, you can use any color you want and wont have to conform to the oppressive rules of THE MAN!!!!!!!

[macojoe]

that is ture, but when I want to troubl shot something it be nice to say hey Skool what wires go were and we on the same page!
Also $8 is cheaper then going out buying 3 color wires and connectors.

But if it was $10 I make my own! ;D

[parishht]

MJ, I sent you an e-mail with wiring diagrams from Wellcraft.

They may help.

[macojoe]

Thanks all downloaded and ready for reference!! :-*