Transom Mod update

[2ndchance]

Went to visit the V-20 today to check on the progress so far. I brought the camera for all of you picture hounds. So far the deck has been installed and glassed in. He used a 2X4 frame screwed and glued to the stringers to support the deck (a little overkill I thought but it gonna move at all). The 2X4's are epoxied to the transom also. An 8X12 hatch will be installed for bilge access. I opted to make a removable bait station in the center section which explains the cut out area in the center. That is another project in the works. An access hatch will be put into front facade for access to the transom and mechanical areas.ENJOY :) :)
http://i162.photobucket.com/albums/t270/2ndchance_2007/Wellcraft2207006-1.jpg
http://i162.photobucket.com/albums/t270/2ndchance_2007/Wellcraft2207005-1.jpg
http://i162.photobucket.com/albums/t270/2ndchance_2007/Wellcraft2207004-1.jpg
http://i162.photobucket.com/albums/t270/2ndchance_2007/Wellcraft2207003-1.jpg
http://i162.photobucket.com/albums/t270/2ndchance_2007/Wellcraft2207008.jpg
http://i162.photobucket.com/albums/t270/2ndchance_2007/Wellcraft2207012.jpg

[2ndchance]

Went to visit the V-20 today to check on the progress so far. I brought the camera for all of you picture hounds. So far the deck has been installed and glassed in. He used a 2X4 frame screwed and glued to the stringers to support the deck (a little overkill I thought but it gonna move at all). The 2X4's are epoxied to the transom also. An 8X12 hatch will be installed for bilge access. I opted to make a removable bait station in the center section which explains the cut out area in the center. That is another project in the works. An access hatch will be put into front facade for access to the transom and mechanical areas.ENJOY :) :)
http://i162.photobucket.com/albums/t270/2ndchance_2007/Wellcraft2207006-1.jpg
http://i162.photobucket.com/albums/t270/2ndchance_2007/Wellcraft2207005-1.jpg
http://i162.photobucket.com/albums/t270/2ndchance_2007/Wellcraft2207004-1.jpg
http://i162.photobucket.com/albums/t270/2ndchance_2007/Wellcraft2207003-1.jpg
http://i162.photobucket.com/albums/t270/2ndchance_2007/Wellcraft2207008.jpg
http://i162.photobucket.com/albums/t270/2ndchance_2007/Wellcraft2207012.jpg

[Airslot]

Lookin good. You'll be feeshin in no time.

[Airslot]

Lookin good. You'll be feeshin in no time.

[Stinky_Hooker]

Lookin very nice!! 8)

[Stinky_Hooker]

Lookin very nice!! 8)

[msbhammer]

Thats some great work. ;D

[msbhammer]

Thats some great work. ;D

[cfelton]

looks good fella.youll get her right soon. Hey, spring is just around the corner. Ive had my boat almost a year and havent put it in the water yet! man in bout to go crazy! We had some warm pretty days last week, but I had a little more to do to it. I think im about ready now. As far as I know my boat hasnt been wet in about six years.It is time!!!!!!!

[cfelton]

looks good fella.youll get her right soon. Hey, spring is just around the corner. Ive had my boat almost a year and havent put it in the water yet! man in bout to go crazy! We had some warm pretty days last week, but I had a little more to do to it. I think im about ready now. As far as I know my boat hasnt been wet in about six years.It is time!!!!!!!

[msbhammer]

Cfelton, did you ever post pics of your V. ??? ???
Cant remember. :( ;)

[msbhammer]

Cfelton, did you ever post pics of your V. ??? ???
Cant remember. :( ;)

[cfelton]

nope,not yet!iv gotta get you all some. iv been pittling on it ,tying up some loose ends. i put all my teak trim back in last weekend . ive finished up the trailer too.i made some gunwale step pads out of some old mahogny that came off my old boat. I had a 1958 Colonial with twin chrysler 225sixes.it was given to me,but i had to move it . I carried it about 30 miles with a 15 hp motor ,close to home where a bad storm sank it . ilater brought it back up and scraped it. it had mahogany interior and a pecan hull. iv used a lot of wood off of it .... i recovered the panels that covered the saddle tanks,dont look too bad for a jack leg. Ill get some pics this week. i guess i need to ask MJ for a gallery,and i might need a little help posting the pics.

[cfelton]

nope,not yet!iv gotta get you all some. iv been pittling on it ,tying up some loose ends. i put all my teak trim back in last weekend . ive finished up the trailer too.i made some gunwale step pads out of some old mahogny that came off my old boat. I had a 1958 Colonial with twin chrysler 225sixes.it was given to me,but i had to move it . I carried it about 30 miles with a 15 hp motor ,close to home where a bad storm sank it . ilater brought it back up and scraped it. it had mahogany interior and a pecan hull. iv used a lot of wood off of it .... i recovered the panels that covered the saddle tanks,dont look too bad for a jack leg. Ill get some pics this week. i guess i need to ask MJ for a gallery,and i might need a little help posting the pics.

[msbhammer]

Looking forward to seeing your V. Any problems with loading pics, just email me te pics and I'll post them for ya. ;)

[msbhammer]

Looking forward to seeing your V. Any problems with loading pics, just email me te pics and I'll post them for ya. ;)

[cfelton]

thanks hammer,ill try em if i have trouble ill let you know ill try to take some this afternoon.im working the graveyard shift this week.iusually sleep till about two or three

[cfelton]

thanks hammer,ill try em if i have trouble ill let you know ill try to take some this afternoon.im working the graveyard shift this week.iusually sleep till about two or three

[msbhammer]

;) ;) ;)

[msbhammer]

;) ;) ;)