More Work done Today

[msbhammer]

Well decided to install my LED lights. Just wasnt sure how I was gonna do it. Run the wire inside the cuddy or all the way around to the other side to the fuse box. Well, I decide to do it the hard way and cut the calk and unsrewed those damm fish rod holders that I hate. "Need tank rack" *;D
Well, just my luck, I run out to West Marine, grab 35 ft. of wire, screws and washers, ect, come home, get all set up, and what do I find !!, wire !!, I already had a bunch of left over wire from when I tore out the old wiring. *>:( >:( >:( What a waiste of cash !!, but "ll keep it for a future stearo for the wifey. Might actually go ahead and run the wire now so I dont haldf to pull the rod holders out again.

Wiring I found. *>:(

http://i47.photobucket.com/albums/f153/msbhammer/DSC02539.jpg

Running the wire.

http://i47.photobucket.com/albums/f153/msbhammer/DSC02538.jpg

Trying my best with that crappy ceiling carpet. Finally cut it and sprayed some 3m Spray to glue it back together.
Wish I didnt have the carpet. Looks more manly with wires hanging down from inside teh cuddy. ;D

http://i47.photobucket.com/albums/f153/msbhammer/DSC02540.jpg

Ok, one side is done.

http://i47.photobucket.com/albums/f153/msbhammer/DSC02541.jpg

Messing with that dam pimp daddy ceiling carpet. >:(
http://i47.photobucket.com/albums/f153/msbhammer/DSC02544.jpg

Wiring to the fuse panel.

http://i47.photobucket.com/albums/f153/msbhammer/DSC02545.jpg

Damm, they work *:o
http://i47.photobucket.com/albums/f153/msbhammer/DSC02542.jpg

http://i47.photobucket.com/albums/f153/msbhammer/DSC02543.jpg

[msbhammer]

Well decided to install my LED lights. Just wasnt sure how I was gonna do it. Run the wire inside the cuddy or all the way around to the other side to the fuse box. Well, I decide to do it the hard way and cut the calk and unsrewed those damm fish rod holders that I hate. "Need tank rack" *;D
Well, just my luck, I run out to West Marine, grab 35 ft. of wire, screws and washers, ect, come home, get all set up, and what do I find !!, wire !!, I already had a bunch of left over wire from when I tore out the old wiring. *>:( >:( >:( What a waiste of cash !!, but "ll keep it for a future stearo for the wifey. Might actually go ahead and run the wire now so I dont haldf to pull the rod holders out again.

Wiring I found. *>:(

http://i47.photobucket.com/albums/f153/msbhammer/DSC02539.jpg

Running the wire.

http://i47.photobucket.com/albums/f153/msbhammer/DSC02538.jpg

Trying my best with that crappy ceiling carpet. Finally cut it and sprayed some 3m Spray to glue it back together.
Wish I didnt have the carpet. Looks more manly with wires hanging down from inside teh cuddy. ;D

http://i47.photobucket.com/albums/f153/msbhammer/DSC02540.jpg

Ok, one side is done.

http://i47.photobucket.com/albums/f153/msbhammer/DSC02541.jpg

Messing with that dam pimp daddy ceiling carpet. >:(
http://i47.photobucket.com/albums/f153/msbhammer/DSC02544.jpg

Wiring to the fuse panel.

http://i47.photobucket.com/albums/f153/msbhammer/DSC02545.jpg

Damm, they work *:o
http://i47.photobucket.com/albums/f153/msbhammer/DSC02542.jpg

http://i47.photobucket.com/albums/f153/msbhammer/DSC02543.jpg

[msbhammer]

Ok MJ, waiting on you and your lights. ;D

[msbhammer]

Ok MJ, waiting on you and your lights. ;D

[charlie_the_tuna]

good job hammy.

[charlie_the_tuna]

good job hammy.

[msbhammer]

Why thank you Charlie. Thats mighty "CUTE" of you to say that. LOL !!! ;D ;D ;D ;D ;D ;D

[msbhammer]

Why thank you Charlie. Thats mighty "CUTE" of you to say that. LOL !!! ;D ;D ;D ;D ;D ;D

[2ndchance]

Pretty work Hammer. What size wire did you use? I like the pretty blue tags ;D.

[2ndchance]

Pretty work Hammer. What size wire did you use? I like the pretty blue tags ;D.

[Airslot]

Nice job Hammer, I've been scanning the site for other pics, but haven't found what I'm looking for? ;D

[Airslot]

Nice job Hammer, I've been scanning the site for other pics, but haven't found what I'm looking for? ;D

[charlie_the_tuna]

psssst guys. . . . dont tell hambone but i heard that guys who use blue tags are gay.

[charlie_the_tuna]

psssst guys. . . . dont tell hambone but i heard that guys who use blue tags are gay.

[msbhammer]

Used #18-2 wire. Shoe string budget on tagging the wiring, but it helps. *;D Airslot, check your email.

So far done:

1. Sand and stain the wood on the V.
2. Patch dash, not the best, but alot better then what it was.
3. Sand and patch, then repaint bow.
4. Replace tilit trim and rams.
5. New LED lights.
6. New battery cables.

Need to finish:
1. Install pulpit/anchor roller chain/rope hatch cover.
2. sand and repaint lower unit.
3. touch up hull.
4. Install keel trailer guard thing a-bob.
5. Install MJ's or Chum's bracket *;D
6. Wash the boat big time.
7. Ask wifey for gas money since I'm broke. :o

[msbhammer]

Used #18-2 wire. Shoe string budget on tagging the wiring, but it helps. *;D Airslot, check your email.

So far done:

1. Sand and stain the wood on the V.
2. Patch dash, not the best, but alot better then what it was.
3. Sand and patch, then repaint bow.
4. Replace tilit trim and rams.
5. New LED lights.
6. New battery cables.

Need to finish:
1. Install pulpit/anchor roller chain/rope hatch cover.
2. sand and repaint lower unit.
3. touch up hull.
4. Install keel trailer guard thing a-bob.
5. Install MJ's or Chum's bracket *;D
6. Wash the boat big time.
7. Ask wifey for gas money since I'm broke. :o

[Mulv80]

Looks good Hammer. I think maybe I should look for a pulpit. I got my coaming cushions today UPS, they are definitely going to be the nicest thing on my boat.

[Mulv80]

Looks good Hammer. I think maybe I should look for a pulpit. I got my coaming cushions today UPS, they are definitely going to be the nicest thing on my boat.

[msbhammer]

Hey Mulv, you didnt grab Airslot and mine anchor rollers did ya from the UPS guy. *>:( * ;D
Those coaming pads are sweet. I have some "Gay" blue and white trim piece on either side of mine, but dont like them to much. I want YOURS !! ;D

Charlie, thanks for lending me your role of blue Tape. *
*:-* * *:P * ;D

Hey Mulv, so how do you mount them ??, they have backing screws in them ?
Didnt you get some sweet deal on the price ??, how long are they ?

[msbhammer]

Hey Mulv, you didnt grab Airslot and mine anchor rollers did ya from the UPS guy. *>:( * ;D
Those coaming pads are sweet. I have some "Gay" blue and white trim piece on either side of mine, but dont like them to much. I want YOURS !! ;D

Charlie, thanks for lending me your role of blue Tape. *
*:-* * *:P * ;D

Hey Mulv, so how do you mount them ??, they have backing screws in them ?
Didnt you get some sweet deal on the price ??, how long are they ?

[Stinky_Hooker]

Looks good man, I like those lights! 8)


"Hammie"...........thats so cute. ;D

[Stinky_Hooker]

Looks good man, I like those lights! 8)


"Hammie"...........thats so cute. ;D

[msbhammer]

Thanks STINK, the colors match my new thongs. ;D

[msbhammer]

Thanks STINK, the colors match my new thongs. ;D

[Mulv80]

I wouldnt steal both, maybe just one so I could watch a thread on how to install the other one ;)

You did a good job with your wiring, mine still looks like a bowl of pasta.

[Mulv80]

I wouldnt steal both, maybe just one so I could watch a thread on how to install the other one ;)

You did a good job with your wiring, mine still looks like a bowl of pasta.

[msbhammer]

Thanks Mulv, its not the best, but its the best I can do with what i have. I hate that dam ceiling carpet. Old, dirty and moldy. Hows the carpet in your V.

[msbhammer]

Thanks Mulv, its not the best, but its the best I can do with what i have. I hate that dam ceiling carpet. Old, dirty and moldy. Hows the carpet in your V.

[Stinky_Hooker]

Hows the carpet in your V.

Well, the Mrs would get mad if she knew I talked about it, but...pretty thin. ::)

[Stinky_Hooker]

Hows the carpet in your V.

Well, the Mrs would get mad if she knew I talked about it, but...pretty thin. ::)

[msbhammer]

LOL STINKY !!!, Thanks to Chum Wifey is silky smooth.

[msbhammer]

LOL STINKY !!!, Thanks to Chum Wifey is silky smooth.

[Stinky_Hooker]

That could be taken a couple different ways. ::)


Chum, you da man!!! :D


But, either way Im gonna pull a Hammer and say:




http://www.forumpictureprocessor.com/pictureprocessor/images/ttiwwp_1.jpg

[Stinky_Hooker]

That could be taken a couple different ways. ::)


Chum, you da man!!! :D


But, either way Im gonna pull a Hammer and say:




http://www.forumpictureprocessor.com/pictureprocessor/images/ttiwwp_1.jpg

[msbhammer]

A gift from Chum to help keep things smooth. ;D

http://i47.photobucket.com/albums/f153/msbhammer/DSC02546.jpg

[msbhammer]

A gift from Chum to help keep things smooth. ;D

http://i47.photobucket.com/albums/f153/msbhammer/DSC02546.jpg

[Stinky_Hooker]

HOLY MOLLY!!!!! :o


CHUM I WANT SOME MAN!!!!! :o :o

[Stinky_Hooker]

HOLY MOLLY!!!!! :o


CHUM I WANT SOME MAN!!!!! :o :o

[msbhammer]

Chum, Lisa did the razor test for ya to see whats gives the smoother finish. She thanks you. *:P Will send ya pics. of the end results. Sorry STINK. *;D

http://i47.photobucket.com/albums/f153/msbhammer/DSC02547.jpg

[msbhammer]

Chum, Lisa did the razor test for ya to see whats gives the smoother finish. She thanks you. *:P Will send ya pics. of the end results. Sorry STINK. *;D

http://i47.photobucket.com/albums/f153/msbhammer/DSC02547.jpg

[Stinky_Hooker]

That was cold cold cold!!! :o


The wife it outta town and everything! :-X

[Stinky_Hooker]

That was cold cold cold!!! :o


The wife it outta town and everything! :-X

[msbhammer]

Cold shower time Brother. 8)

[msbhammer]

Cold shower time Brother. 8)

[msbhammer]

Leave it to Chum to hi-jack this thread. ;D ;D ;D ;D

[msbhammer]

Leave it to Chum to hi-jack this thread. ;D ;D ;D ;D

[charlie_the_tuna]

Charlie, thanks for lending me your role of blue Tape. *
*:-* * *:P * ;D

anytime sugar. just send it back when your done. . . . i borrowed it from maco.

[charlie_the_tuna]

Charlie, thanks for lending me your role of blue Tape. *
*:-* * *:P * ;D

anytime sugar. just send it back when your done. . . . i borrowed it from maco.

[msbhammer]

:-X :-X :-X :-X :-X :-X :-X :-X :o :o :o ;D :P

[msbhammer]

:-X :-X :-X :-X :-X :-X :-X :-X :o :o :o ;D :P

[chumbucket]

Man. I hijacked this thread without even trying. ;D
For a happier ending, I'll bet lefty likes the battery powered number better. ;)

[chumbucket]

Man. I hijacked this thread without even trying. ;D
For a happier ending, I'll bet lefty likes the battery powered number better. ;)

[macojoe]

Hammer the lights look great!!

Just one thing, Why do I always have to be the one to give him the bad news?

You got them on the wrong sides!! They go the other way!! :-/
Should not be to hard to fix.

[macojoe]

Hammer the lights look great!!

Just one thing, Why do I always have to be the one to give him the bad news?

You got them on the wrong sides!! They go the other way!! :-/
Should not be to hard to fix.

[reelapeelin]

Hate to be the one to bring it up...but ya got the colors on the wrong sides :-[ ...

[reelapeelin]

Hate to be the one to bring it up...but ya got the colors on the wrong sides :-[ ...

[Mulv80]

This is one of the funnier threads I have read ;D


Hammer, The coaming cushions are 56" long. I'm not sure how I'm going to mount them yet, they have a rounded rail on the back that slides into a channel that mounts to the boat. I dont have the channel part so I will have to improvise. I only paid $60 for a set of 3 so I dont mind having to figure out a way to mount them.

[Mulv80]

This is one of the funnier threads I have read ;D


Hammer, The coaming cushions are 56" long. I'm not sure how I'm going to mount them yet, they have a rounded rail on the back that slides into a channel that mounts to the boat. I dont have the channel part so I will have to improvise. I only paid $60 for a set of 3 so I dont mind having to figure out a way to mount them.

[randlemanboater]

Hate to be the one to bring it up...but ya got the colors on the wrong sides :-[ ...








:o

[randlemanboater]

Hate to be the one to bring it up...but ya got the colors on the wrong sides :-[ ...








:o

[Stinky_Hooker]

LMAO MJ! You are right!! Didnt notice that! :D

[Stinky_Hooker]

LMAO MJ! You are right!! Didnt notice that! :D

[msbhammer]

You guys had me going there for a minute. That wasnt funny. >:( >:( >:( >:(

[msbhammer]

You guys had me going there for a minute. That wasnt funny. >:( >:( >:( >:(

[Airslot]

Hammer, just depends on whether your coming or going I guess ;D

[Airslot]

Hammer, just depends on whether your coming or going I guess ;D

[msbhammer]

My fingers are still sticky with that 3mm spray when I had to play with that crappy carpet. The only way those lights will be moved is with a Hammer. >:(

[msbhammer]

My fingers are still sticky with that 3mm spray when I had to play with that crappy carpet. The only way those lights will be moved is with a Hammer. >:(

[Airslot]

Hey, do we have any members in Washington State? Me and Hammer may need a favor :o

[Airslot]

Hey, do we have any members in Washington State? Me and Hammer may need a favor :o

[macojoe]

I thought it was!! http://syncboard.com/albums/album02/202_G.gif http://syncboard.com/albums/album02/15_G_001.gif

[macojoe]

I thought it was!! http://syncboard.com/albums/album02/202_G.gif http://syncboard.com/albums/album02/15_G_001.gif

[msbhammer]

Chum, Wifey loves the battery one's. ;D

Mulv, as far as your channel on your coaming cushions. is it the same type of square channel you see on the bim top rails, that are used for adjusment ??

[msbhammer]

Chum, Wifey loves the battery one's. ;D

Mulv, as far as your channel on your coaming cushions. is it the same type of square channel you see on the bim top rails, that are used for adjusment ??

[charlie_the_tuna]

ok hammer all kidding aside.
i'm gonna need to know if these things will interfere with your field of vision.
when you get that thing out at night i need to know.
i'm looking at perko's led side lights and that aint a bad place to mount em.

[charlie_the_tuna]

ok hammer all kidding aside.
i'm gonna need to know if these things will interfere with your field of vision.
when you get that thing out at night i need to know.
i'm looking at perko's led side lights and that aint a bad place to mount em.

[msbhammer]

OK, thats it. MJ loose's a turn on the swing when he comes down !! >:(

;D ;D ;D ;D ;D ;D

http://i47.photobucket.com/albums/f153/msbhammer/householdknots.jpg

Charlie, I'll let ya know how they work. It will take some time getting use to them. Always use to seeing that bow light up front. Always have my bumpers lying up on the bow as well. Wonder if that will obstruct forward vision ??

Air and I are looking for some farrr northern members, the other half of our project is still way way up north .
>:(

[msbhammer]

OK, thats it. MJ loose's a turn on the swing when he comes down !! >:(

;D ;D ;D ;D ;D ;D

http://i47.photobucket.com/albums/f153/msbhammer/householdknots.jpg

Charlie, I'll let ya know how they work. It will take some time getting use to them. Always use to seeing that bow light up front. Always have my bumpers lying up on the bow as well. Wonder if that will obstruct forward vision ??

Air and I are looking for some farrr northern members, the other half of our project is still way way up north .
>:(

[reelapeelin]

Sorry, Hammer... ::) ...couldn't resist ;D ;D ;D ...

[reelapeelin]

Sorry, Hammer... ::) ...couldn't resist ;D ;D ;D ...

[msbhammer]

Priced LED's at West Marine yesturday Charlie. $185.00
Thats a whole lot of pennies. :(
Mine I think were 66 bucks with shipping I recall.

[msbhammer]

Priced LED's at West Marine yesturday Charlie. $185.00
Thats a whole lot of pennies. :(
Mine I think were 66 bucks with shipping I recall.

[Airslot]

See my post in general, I'm gonna pick mine up today for 89

[Airslot]

See my post in general, I'm gonna pick mine up today for 89

[msbhammer]

OK guys, going outside to sand, grand, beat with a hammer the lower unit so I can repaint it. There's no color matching, so I guess I cant screw that up. Or can I. >:( ;D 8)

[msbhammer]

OK guys, going outside to sand, grand, beat with a hammer the lower unit so I can repaint it. There's no color matching, so I guess I cant screw that up. Or can I. >:( ;D 8)

[msbhammer]

Yo Airslot. Our packages arrived. ;D

[msbhammer]

Yo Airslot. Our packages arrived. ;D

[lumberslinger178]

sweet work there hammie ... ;D ;D ;D ;D ;D

[lumberslinger178]

sweet work there hammie ... ;D ;D ;D ;D ;D

[msbhammer]

Thanks Lumber. ;)

[msbhammer]

Thanks Lumber. ;)