Log in

View Full Version : Puttin a lil Bling Bling on yo Veeeeeee


Airslot
05-28-2007, 09:47 AM
http://i36.photobucket.com/albums/e41/Airslot/Props001.jpg

http://i36.photobucket.com/albums/e41/Airslot/Props003.jpg

It was a little dark when I snapped em, but that my Merc Revolution 4 17p prop that will be mounted Tuesday with any luck at all.

tsubaki
05-28-2007, 10:35 AM
;D ;D ;D ;D ;D ;D

macojoe
05-28-2007, 11:05 AM
As long as you don't bring CB out on your boat you be fine!!
He loves to chew up other peoples props >:(

reelapeelin
05-28-2007, 04:19 PM
Ooooo!! ... purdy as a speckled pup!! 8) ...


Slot, my bud w/the Everglades went to a 4-blader w/ stern-lifting characteristics ... be interesting to see if this particular prop has any of the same, or if it was dialed in on his ... any thoughts of this :D ...


Hey...looky here ...

http://sites.mercurymarine.com/portal/page?_pageid=126,51903,126_51917&_dad=portal&_sche ma=PORTAL

it DO have some lift to it 8) ...

Airslot
05-28-2007, 05:00 PM
I figure I've probably just made more work for myself. I've been thinking that I could run mine a hole higher, so I can probably run this one up 2 holes. Now where did I put that hoist? ;D

tsubaki
05-28-2007, 05:27 PM
(jack plate)

msbhammer
05-28-2007, 11:13 PM
I like it. ;D
I'll be over Tuesday night with a wrench. ;D ;D ;D

reelapeelin
05-28-2007, 11:50 PM
I like it. ;D
I'll be over Tuesday night with a wrench. ;D ;D ;D




:o Hide the donuts!!... :o ...

reelapeelin
05-28-2007, 11:51 PM
I figure I've probably just made more work for myself. I've been thinking that I could run mine a hole higher, so I can probably run this one up 2 holes. Now where did I put that hoist? ;D



I wouldn't move it til after ya run it ;) ...

Airslot
05-29-2007, 07:44 PM
Well, after working about a million hours over the weekend, my brain is fried. The good news? Tomorrow at Sunrise I'm going east, way, way, way, way, way east ;D

reelapeelin
05-29-2007, 09:49 PM
Sounds like out where da BIG FISH play ;) 8) 8) ...Ketchum up, Slot ... you deserve a good trip... ;) ;D ...

Airslot
05-29-2007, 10:56 PM
Just got home...gettin set to go load everything up for sunrise launch. Camera is already in boat ::)

After looking at this prop, it has massive blade area. Can't wait to see results. Full report coming tomorrow night or the next morning ;)

Weather forecast calling for no seas, wind 5mph :D

reelapeelin
05-30-2007, 10:24 AM
"But did he ever return?
No he never returned,
but his fate was plain to see..."
;D ;D ;D ;D ;D ;D ;D ;D ...

lumberslinger178
05-30-2007, 08:19 PM
AIR........ PICS BRO ;D ;D ;D ;D

Airslot
05-31-2007, 08:57 AM
I've returned...posted fishing report with obligatory pics. Confirmed one of my suspicions...got to raide the motor for optimum performance. She still turns 5400 -5500 just as she did with the old prop. I can't make her break loose trimmed up, even turning, so she's runnin too deep. Overall I was very happy with new prop. Feeshin was good too ;D

Seacrets
05-31-2007, 09:54 AM
I also run a four blade prop on my 150 merc. Why do you feel you need to raise your motor? One advantage I see is it won't cavitate when turning. I'm still turning good rpm's, better hole shot and on plane faster. I'm running 44.7 mph on gps and very happy with that number. You won't get a higher top end with a four blade prop as opposed to a three blade. What's your top end? Am I missing something?

Airslot
05-31-2007, 10:21 AM
Optimum motor height will give best mileage. If I can run 1.5" less gearcasr through the water, thats alot less drag.

Seacrets
05-31-2007, 10:29 AM
Slot, I checked your gallery and you have a 20" transom (standard for 87 was 25"). Your boat may have been a special order. My 86 is 25" and I know the four blade helped my performance alot.

Airslot
05-31-2007, 10:36 AM
Seacrets, is your motor mounted in the bottom holes? Mine is mounted as low as she'll go.

Seacrets
05-31-2007, 10:49 AM
Won't be near the boat till next weekend. I'll check it out and get back to you.