SKOOLZ or anyone => OMC info

[bigshrimpin]

Guys do you know of any online resources that have torque specs for OMC motors . . . and or exploded diagrams? I have a friend that just picked up a couple of motors and is looking for some good online resources.

[tsubaki]

See how far this takes you. I got fuel pump replacement schematics to replace the VRO. Haven't dug too deep into the site. Let me know what goes on.
http://epc.brp.com/default.aspx?brands=ej&lang=E&dealerlocator=no

[Skools Out]

i'll get back to you on this i need to see if my links all still work that one above is of no help unless you only want part numbers and a pic of it in parts.

[bigshrimpin]

Looks like I might get a blown 1995 200 Johnson for $500 and a crabbing trip!! Will know tomorrow.

[tsubaki]

Between everybody on the site I'm sure there is enough books to get what info you want.

[bigshrimpin]

Looks like I'm an OMC man as of today!!! I have to remove it from his boat this weekend, but I put down a deposit and got a bill of sale. Looked a the damage . . . . just needs a new cylinder and a light hone in #1 . . . I get controls, tach, and all rigging too.

[bigshrimpin]

Anyone have an extra OMC lifting eye or flywheel puller they want to part with . . . or lend/rent to me?

[Bygracealone]

BS, I've got a lifting eye I would lend you, but I'm way out here in MD... If you want to pay for shipping both ways, I'm happy to lend it to you.

Otherwise, I know Skools has a number of ways to make homemade lifting eyes...

[phatdaddy]

i thought the omc's had a built in lifting eye?

[Bygracealone]

I know Suzuki's do, but not OMC's as far as I know...

[Skools Out]

i built mine out of an old Comalong, i chopped it up and welded it up to a plate for my OMC stuff. still trying to find ya some still good sites all my old ones are gone thus far ugh.

[tsubaki]

The 50 & 70hp OMC's used to have lifting rings and some 4 cly.
We have made ours universal for Merc, Mariner and Omc by welding a 1/4" T shaped plate with a 1" hole for the lift eye and 3/8" holes drilled for the flywheel puller threads.
http://i175.photobucket.com/albums/w159/tsubaki3/Picture296.jpg
http://i175.photobucket.com/albums/w159/tsubaki3/Picture297.jpg

[bigshrimpin]

Thanks you guys . . . I think I'll be in good shape just building one like that . . . I've got to get a flywheel puller now. I've got a Merc Flywheel puller, but I don't think they're the same as the OMC.

http://www.wellcraftv20.com/gallery/albums/album07/P1010286_Small.jpg

I used this for my old FICHT as a lifting eye.

[macojoe]

I do things the hard way!! I wrap a Yellow webed tow strap around making my own harness and use the come along to lift, has worked everytime!!
But the harness is never the same twice!! :P

[bigshrimpin]

I was just reading about the 90's 200 and 225. Looks like the only difference was the carbs . . . Anyone running one of these on there V20?

[THEFERMANATOR]

OMC didn't have all of the major porting differences like MERCURY does. They normally used different carbs, different tuners, and sometimes different reeds. The XP and GT's are a whole nother story though.

[Bygracealone]

BS,

I'm running a 96 200 Ocean Runner on my dually.

[bigshrimpin]

Grace - Do you have any performance numbers . . . GPS top speed or fuel burn? What prop are you running?

[Bygracealone]

BS, I'm ashamed to say that I don't have any performance numbers. I don't have a speedometer, nor do I have a GPS, sorry... :-/

I do know my boat screams ;D It's fast... 8)

[bigshrimpin]

Don't be ashamed . . . 10 years ago we'd all be w/o a GPS . . . and be lucky to have a speedo or fuel management. Someone might of had a loran. I think I bought my first GPS in the summer of 1998. What prop and how many rpms are you turning . . . I can figure out speed from those numbers :)

[Bygracealone]

BS,

I'm running a 14 1/2 X 19 SS prop. I ran it at 5300 RPM's trimmed down as far as possible and still had a little ways to go on the throttle.

[bigshrimpin]

http://www.wellcraftv20.com/gallery/albums/album07/DSCN2356_Small.jpg

well here she is!! Just gotta replace one pistons and it's going on my boat.