Switch Panel

[Chanhyx]

Finally getting my 1987 center console dialed I’m and need to find a replacement for the console switch panel, looking for ideas to fill the hole as well if I can’t find a replacement, thanks for any ideas.
Monty
https://photos.app.goo.gl/F9ybqoJUhXNaSBk98
https://photos.app.goo.gl/16HJpcH1Hn1Np51n9
https://photos.app.goo.gl/oD4atM18hwGsqjHs7
https://photos.app.goo.gl/Vkz95KScFVpDfB2y8

[SkunkBoat]

look at https://newwiremarine.com/custom-marine-switch-panels/


Or you can replace the panel with HDPE sheet (StarBoard). You can add a 6 or 8 switch panel from Blue Seas.


Don't get hung up trying to make it like original. Think out of the box. Use the space in a modern way with a modern look.


see previous posts on the subject http://www.wellcraftv20.com/community/showthread.php?t=21334

[steplift20]

1/4 inch starboard should be good.
I believe Home Depot sells it In 2 x4 sheets

[scook]

I agree that Starboard is a good option. It machines similar to wood - you can use table saw, hole saws, jigsaw, router to round over edges, etc. With a little care, you can have a really great looking dashboard, configured exactly the way you want it.