Rod boxes cracked

[steplift20]

Since I took out the rod boxes to get to the steering cable of course there cracked what would be the easy way to repair the cracks? Bondo , Epoxy Fiberglass Not sure what to use

[Greyduk]

I patched mine with fiberglass resin and cloth. You just need to rough up the backside with sandpaper so you can get good adhesion.

[steplift20]

Thanks do you have to mix anything or is the resin out of a can?

[smokeonthewater]

https://www.google.com/shopping/product/16128231792413755930?lsf=seller:8740,store:3341704 894885279178&prds=oid:8150455430071082338&q=loctite+plastic+bonder&hl=en&ei=6O56V4mrC4zYjwTOpbXIBA&lsft=cm_mmc:Shopping-_-LIAs-_-D24-_-100371824&lsft=gclid:CKmx4pv52s0CFQ2QaQodK1QNMw

Use this and any fabric IE tshirt etc on the back

[steplift20]

Cut a piece of cotton and mix and cover the crack with this stuff and it's works? I can do that I will get it tomorrow
How about if I use fiber tape they use for dry wall

[smokeonthewater]

Almost anything will work as long as it is porous and will easily conform to the shape...

If you have to do a corner the drywall stuff might not work