View Full Version : whats the smallest outboard you would put on a v20
jamesbalog
08-08-2014, 08:13 AM
may be buying one shortly, whats the least amount of hp you would put on a center console v20?
smokeonthewater
08-08-2014, 08:57 AM
Mine runs out great with my '75 merc 115.... It is generally accepted here that 90 is the smallest that will work BUT a modern 90 SHOULD have the same power to the prop as my old 115 soooo you MIGHT be able to get by with a little less in a modern 2 stroke.... A 4 stroke would need to be a little bigger due to weight.
Your use will also affect this... If you generally go out with 2 huge coolers full of ice and 4 guys n gear you will have much different results than if you boat solo with minimal gear.
Destroyer
08-08-2014, 12:53 PM
Mine runs out great with my '75 merc 115.... It is generally accepted here that 90 is the smallest that will work BUT a modern 90 SHOULD have the same power to the prop as my old 115 soooo you MIGHT be able to get by with a little less in a modern 2 stroke.... A 4 stroke would need to be a little bigger due to weight.
Your use will also affect this... If you generally go out with 2 huge coolers full of ice and 4 guys n gear you will have much different results than if you boat solo with minimal gear.
X2... what Smoke said. And I can tell you from first hand experience that a 65 HP engine will NOT get you up on plane.
jamesbalog
08-08-2014, 01:08 PM
Thanks guys i appreciate it.
now the search begins
if anyone knows of a good deal on a 115-200 hp outboard with good compression let me know.
cheaper the better so probably carbed
steplift20
08-16-2014, 08:42 AM
115 is the smallest I would go ,I have a 150 hanging off mine even if a 90 would be ok I would go no smaller than a 115 that's just my opinion. I also think that the plate mounted on the boat says that too
THEFERMANATOR
08-16-2014, 08:56 AM
115 is the smallest I would go ,I have a 150 hanging off mine even if a 90 would be ok I would go no smaller than a 115 that's just my opinion. I also think that the plate mounted on the boat says that too
A 90 will do it. And considering WELLCRAFT sold them with 90's from the factory, I would say it is a safe bet. The old 1.6L SEA-DRIVE was the same powerhead as a 90HP propshaft rated engine. It was rated at 115HP at the flywheel, but in 85 when propshaft ratings came out it became a 90HP. My 1.6L SEA-DRIVE was no powerhouse, but it did plane out my cuddy with power to spare(but not much). Topped out around 24 or so IIRC, and cruised about 18-20. The downside was it was a FUEL HOG! Because the engine was loaded so hard, it GULPED fuel.
bradford
08-16-2014, 04:00 PM
Personally I wouldn't go lower than a 140 or 150. A 90 might push it, but it's gonna be working hard all the time you're on a plane.
smokeonthewater
08-16-2014, 05:59 PM
My 1975 merc 115 (90 hp by today's standards) will plane my V20 at 1/2-2/3 throttle
Striper80
08-16-2014, 11:04 PM
My uncle's 89 V20 cuddy moved fine with a 130 Yamaha on it. Since he put a 225 Yamaha on there it moves really well.
bgreene
08-17-2014, 06:10 AM
Super reputable used motor dealer in my experience - ARG Marine, florida, ask for Victor.
I searched a lllllllong time before finding and buying from them, shipped the motor in a proper crate, warrantied, addressed all my questions in writing, all good.
Way too may questionable used motors out there, especially older one's without hour meter so you have no idea how old/ used/ tired.
Another good way is from outboard motor dealers who get them on trade.
Good luck, and .......... I'd go with 150 hp. Motor will work less hard too.
booch
08-24-2014, 09:10 PM
My boat a 86, It was a merc 150 carb now a left over new 175 with a lot of xtra power. Cruising is effortless. Also hydro assist steering was worth the investment during the new rigging.
bgreene
09-13-2014, 08:58 PM
Smallest on a V ? 2.5 hp
kamikaze
09-25-2014, 06:04 PM
Here a link to a guy selling one with a 40 hp evinrude! I guess you could ask him for some "performance" numbers
https://annapolis.craigslist.org/boa/4666750465.html
Kamikaze
bgreene
09-26-2014, 02:57 PM
40 hp on a V ? I like it !
How about triple old 18 hp outboards ?
Or the new 557 hp outboard.
Kracker Jack
05-31-2015, 05:33 PM
2004 4 stroke 90hp on a v20?
bradford
06-01-2015, 03:39 PM
I really don't think you'll be happy with it.
captaingene
06-01-2015, 07:18 PM
2004 4 stroke 90hp on a v20?
I feel a 90 especially if 4 stroke will be too small. I am using a 2013 Mercury 150hp 4 stroke and very happy. Trim tabs improved handing of the extra weight of 4 stroke as well . I guy in my marina has a dual console V 20 sport and has an older 175 Evinrude ... With a 90 you will be pushing that engine hard
captaingene
06-01-2015, 07:19 PM
This are older Wellcraft hulls and seem to be heavier then today's fiberglass hulls . Keep that in mind as well
bgreene
06-27-2015, 05:49 AM
150 seems the solid bet overall......
Only the freaks and wacko's need bigger outboards than that.......
Some guys don't stop at 200 hp.......they get the bigger block 200 HO edition.
And, I'll bet if the V21 didn't have 200 max hp rating, some would go 225 - 300.
Freaks and wacko's.....
jorgealvarez2
07-19-2015, 06:51 PM
I got an 87 v20 with a 2006 115 Mercury, I just got back from using it for the first time since I got it and I was running at 31mph at 4500 rpms. I had 4 adults and 2 small kids. I was really impressed with it I must say.
vBulletin® v3.8.2, Copyright ©2000-2025, Jelsoft Enterprises Ltd.