couple items for sale....

[Stinky_Hooker]

Since I parted with the hull yesterday and RACER is coming to get my trailer tomorrow I have a couple items left.

1-sliding cuddy hatch both pieces...very good shape. make offer

1-drivers side ONLY windshield and side piece..no middle or passengers side. make offer

1-BRAND NEW 45 gallon plastic belly tank with new sending unit. It was 150.00 on ebay, Ill let it go for 75+shipping.


My body will also be...oops, sorry, wrong website. ::)

[racerx]

yep, wrong site bud. i believe you are looking for hornygayrednecks/thong.com

[kamikaze]

Stinky:

Could you post a pic of the tank? I'm interested, but need to see where the fill and vents are located to make sure it will work with for my application

Kamikaze

[Bygracealone]

Does anybody happen to know if that windshield would fit on the driver's side of my dual console?

Stinky, can you post a picture and perhaps give some of the specs?

If it does fit my dually, I'll make an offer...

Steve

[axespino]

Will that sliding hatch work on a 73 V20 anc can you post a pic of the hatch.

[Stinky_Hooker]

Not sure on the hatch...

Ill get pics and measurements on everything either tomorrow evening or Tuesday. Im heading out fishing tonight about midnight...fixin to hit the hay. ;)

[axespino]

Thanks.

[Blue_Runner]

Grace, windsheild is a questionable fit. Those dually's have a much shorter side windsheild. Why they did that I don't know. :-/

Axespine, I doubt that hatch will fit the older hull, but you never know. :-/

Sorry guys, not trying to rain on your parade's but you did ask for opinions.... :(

[Bygracealone]

Hi BR,

Thanks buddy. I appreciate you lookiing out for me and responding.

I had my doubts, so you've confirmed what I thought was the case.

I think it will be a while till I get a windshield for her... Oh well, not a huge problem.

[Blue_Runner]

2nd thought Grace - I looked at your gallery. The side looks like it might work. I think the width of the front piece might be of concern. Measure real good and make a decision from there. I know Stink will make you a good deal ;)

Here it is guys, what ya'll think?:
http://www.wellcraftv20.com/gallery/albums/album102/100_0362.sized.jpg

[Stinky_Hooker]

Alright guys...here we go:

The hatches..rear 20"w X 24" L

http://www.forumpictureprocessor.com/pictureprocessor/images/102_0778.jpg


Front 29.25L X 20.5"W (not counting flange
http://www.forumpictureprocessor.com/pictureprocessor/images/102_0777_1.jpg


Fuel Tank:

The fill, fuel outlet and sending are at one end with a vent on the other. It has a little dirt on it, but it is brand new..never used. you can even see the yellow cap in the fill inlet.

http://www.forumpictureprocessor.com/pictureprocessor/images/102_0773.jpg

The tank is 25" w and fits perfectly into a V20 belly area. I had this one in mine for a test fit.


I dont have pics and measurements on the shield yet sorry. I am running by the house in a few minutes and Ill do it next....hang on an hour or so for me.

[Stinky_Hooker]

http://www.forumpictureprocessor.com/pictureprocessor/images/Photo_062806_002.jpg



http://www.forumpictureprocessor.com/pictureprocessor/images/Photo_062806_001.jpg



Length of side at bottom-53.75
length of sie at top -44"


Width at top-26.5"
Width of front glass at bottom -30"


Height of front glass at corner joint- 24"
Height of front glass where it meets walkthrough -"25.5

[Skools Out]

whats all the measurments of the tank lenght and height w/ fill neck and w/o fill neck?

[Stinky_Hooker]

whats all the measurments of the tank lenght and height w/ fill neck and w/o fill neck?


You killin me smalls!!!! ;D

Its 25widex8"H at the center add about 2" for the fill neck.......Ill get back to you on the length. ::)

[Skools Out]

aight tanks n jeeps bro ;D

[captbent]

I DID NOT SEE A HOW MUCH FOR A STINKY HOOKER I KNOW THEY CAN GO FOR A FEW BUCKS :P

[axespino]

I did some measurements on the cuddy and the distance on the center of the wood sliders from center to center is 27 1/2 inches. Inside to inside of the sliders is 26 1/2 inches. Will that fit the hatch that you have

[Stinky_Hooker]

Ill see bud been really busy...trying to fish tomorrow again. Ill check tonight or this weekend...parts are at dads house.

[axespino]

Sounds good I appreciate you taking the time. Good luck on the fishing trip.

[Stinky_Hooker]

I did some measurements on the cuddy and the distance on the center of the wood sliders from center to center is 27 1/2 inches. *Inside to inside of the sliders is 26 1/2 inches. *Will that fit the hatch that you have


Hey I measured mine and it was like 20.5" for the front and 19 for the back panel. Thats alot of difference if yours is 27. *???


Oh and Skools, the tank is 58" long, 24" wide and 8" deep, not counting for the fill neck...add 2" for that.

I measearued the width across the hatches...center to center.

[axespino]

What year is the boat?

[Stinky_Hooker]

'79

[axespino]

Must be totally different than a 73. Thanks for all of your help.

[Skools Out]

hey Stink PM me the price and the cap it holds? thanks brother

[Bygracealone]

BR and Stinky,

Window won't fit! :-/

Thanks for all of your time and effort.

Steve

[Blue_Runner]

Oh well, you need a whole windshield anyway.

Its gonna be hard to find a windshield for that dually.

[Stinky_Hooker]

BGA, Imeant to tell you when I was at DI I seen a dually with custom made ones. They were made out of tinted lexan and it looked nice! My guess is he either didnt like the small sdes or it was missing em so he built em out of plexi. Ill see about some pics when Im down there again for you.

There is a place here in Mobile that can heat and bend plexi and build whatever you want. You may be better off doing it that way and make them the size you need. ;)

[Bygracealone]

Thanks Stinky. I'll definitely keep that in mind.

[LESTERUS]

HOW MUCH WOULD YOU LIKE FOR THE SLIDING HATCH AND THE BOTTOM PART?

WHAT CONDITION ARE THEY IN?

LESTERUS
[email protected]

[Stinky_Hooker]

You mean the two sliding hatch pieces?

Make an offer and pay shipping...they are in good shape....the pics are on page one of this thread.