rod boxes on ebay

[C YENSEN]

hey Airslot and lesterus, these look like the ones you used?

$125 for the pair, cheaper or more expensive than your?

http://cgi.ebay.com/ebaymotors/Flush-Mount-Rod-Boxes_W0QQitemZ2484816158QQihZ002QQcategoryZ26455Q QrdZ1QQssPageNameZWD1VQQcmdZViewItem

[C YENSEN]

hey Airslot and lesterus, these look like the ones you used?

$125 for the pair, cheaper or more expensive than your?

http://cgi.ebay.com/ebaymotors/Flush-Mount-Rod-Boxes_W0QQitemZ2484816158QQihZ002QQcategoryZ26455Q QrdZ1QQssPageNameZWD1VQQcmdZViewItem

[TheTinMan]

$100 for shipping????

[TheTinMan]

$100 for shipping????

[C YENSEN]

yeah, its a little steap, but i think Lesterus paid $250 for the pair and shipping. i cant find that thread

[C YENSEN]

yeah, its a little steap, but i think Lesterus paid $250 for the pair and shipping. i cant find that thread

[macojoe]

I hate shipping!! thats were they always rape you!!

For some reason I thought the ones guys bought here were longer??

[macojoe]

I hate shipping!! thats were they always rape you!!

For some reason I thought the ones guys bought here were longer??

[Airslot]

Nope, 3 rods per box. About 90 each and shipping from FPMarine was reasonable.

Airslot.

I can measure mine if needed

[Airslot]

Nope, 3 rods per box. About 90 each and shipping from FPMarine was reasonable.

Airslot.

I can measure mine if needed

[C YENSEN]

FPmarine now wants $120 each, plus shipping

[C YENSEN]

FPmarine now wants $120 each, plus shipping

[macojoe]

FPmarine now wants $120 each, plus shipping

Thats cause all the V20 members are buying them!!

[macojoe]

FPmarine now wants $120 each, plus shipping

Thats cause all the V20 members are buying them!!

[LESTERUS]

CY:

THE ONES I USED WERE 68" LONG TO COVER THE WHOLE OPENING, SINCE MY ORIGINALS WERE TRAPEZOIDAL. THAT'S WHY I PAID $120.00 PLU SHIPPING.

THE OTHER CHOICE I HAD WAS CUSTOM MADE, FIBERGLASS $250.00 EA.+ SHIPPING. IF I HAD THE MONEY I WOULD HAD PAID FOR THEM BECAUSE THE BOAT WOULD LOOK ORIGINAL AND THEY WERE BETTER QUALITY.

ANY HOW IF 55 1/2" WOULD FIT YOUR BOAT $120/PAIR
PLUS SHIPPING DOESN'T SOUND BAD.

TO FIND THE POST LOOK UNDER REPAIRS/ROD BOXES

LESTERUS

[LESTERUS]

CY:

THE ONES I USED WERE 68" LONG TO COVER THE WHOLE OPENING, SINCE MY ORIGINALS WERE TRAPEZOIDAL. THAT'S WHY I PAID $120.00 PLU SHIPPING.

THE OTHER CHOICE I HAD WAS CUSTOM MADE, FIBERGLASS $250.00 EA.+ SHIPPING. IF I HAD THE MONEY I WOULD HAD PAID FOR THEM BECAUSE THE BOAT WOULD LOOK ORIGINAL AND THEY WERE BETTER QUALITY.

ANY HOW IF 55 1/2" WOULD FIT YOUR BOAT $120/PAIR
PLUS SHIPPING DOESN'T SOUND BAD.

TO FIND THE POST LOOK UNDER REPAIRS/ROD BOXES

LESTERUS

[LESTERUS]

THOSE ARE 2 RODS, MINES ARE 3 RODS AND THE ADD DOES NOT SAYS 125$ A PAIR.

[LESTERUS]

THOSE ARE 2 RODS, MINES ARE 3 RODS AND THE ADD DOES NOT SAYS 125$ A PAIR.

[Skools Out]

THOSE ARE 2 RODS, MINES ARE 3 RODS AND THE ADD DOES NOT SAYS 125$ A PAIR.
here's the ad.


Flush Mount Rod Boxes.Sold as a pair ( 2 ) The overall size is 55 1/2'' L x 16 1/2'' W The cutout size is 53 1/4'' L x 14'' W They hold 2- rods any questions please call Marine Surplus (239) 332-0909


--------------------------------------------------------------------------------

[Skools Out]

THOSE ARE 2 RODS, MINES ARE 3 RODS AND THE ADD DOES NOT SAYS 125$ A PAIR.
here's the ad.


Flush Mount Rod Boxes.Sold as a pair ( 2 ) The overall size is 55 1/2'' L x 16 1/2'' W The cutout size is 53 1/4'' L x 14'' W They hold 2- rods any questions please call Marine Surplus (239) 332-0909


--------------------------------------------------------------------------------

[C YENSEN]

WHAT DO YOU THINK SKOOLS, GOOD DEAL? I DONT USE MINE FOR RODS, GAF, AND POLE USUALLY. JUST LOOKING TO GET RID OF OLD BEATIN UP ORIGINALS.

[C YENSEN]

WHAT DO YOU THINK SKOOLS, GOOD DEAL? I DONT USE MINE FOR RODS, GAF, AND POLE USUALLY. JUST LOOKING TO GET RID OF OLD BEATIN UP ORIGINALS.

[Skools Out]

hey if ya don't use them just round off a piece of thin seaboard with a router and cover the holes.

[Skools Out]

hey if ya don't use them just round off a piece of thin seaboard with a router and cover the holes.

[Seacrets]

That's the size of the ones I'm selling. They are too small for the V20

[Seacrets]

That's the size of the ones I'm selling. They are too small for the V20

[C YENSEN]

HEY SEACRETS. THEY ARE BIGGER THAN THE ONES I HAVE IN MY 84'

[C YENSEN]

HEY SEACRETS. THEY ARE BIGGER THAN THE ONES I HAVE IN MY 84'

[Seacrets]

They wouldn't work in my 86 and they would've been too small for the 85 I used to own. I bought mine for the 85 from SSI in Maryland and they weren't cheap. I have a pair of that exact size and that's why I'm selling them.

[Seacrets]

They wouldn't work in my 86 and they would've been too small for the 85 I used to own. I bought mine for the 85 from SSI in Maryland and they weren't cheap. I have a pair of that exact size and that's why I'm selling them.

[C YENSEN]

WHAT ARE THE DIMENSIONS ON YOUR AGAIN?

[C YENSEN]

WHAT ARE THE DIMENSIONS ON YOUR AGAIN?

[Seacrets]

They're the same size as the ones offered in this ad, identical. *Shipping to NC was less than $25.00 plus $8.25 for the packaging , box etc. This is what the Fast Mail facility charged me to box them. *They could work in your boat as mine is an outboard model. I did make a mistake. Mine are for two rods, not three. Sorry.

[Seacrets]

They're the same size as the ones offered in this ad, identical. *Shipping to NC was less than $25.00 plus $8.25 for the packaging , box etc. This is what the Fast Mail facility charged me to box them. *They could work in your boat as mine is an outboard model. I did make a mistake. Mine are for two rods, not three. Sorry.

[C YENSEN]

these ones on ebay wont fit my 84' :'( the cutout size on the boat is 16" tall these are no big enough

[C YENSEN]

these ones on ebay wont fit my 84' :'( the cutout size on the boat is 16" tall these are no big enough