replacing water pump 225 rude

[chart]

replacing the water pump on my 96 rude 225 and noticed a crack in the pipe is this a problem also a bad seal on this tube.

[THEFERMANATOR]

The crack in the tube should be fine, just make sure it doesn't have a sharp edge sticking out that could cut the seal in the water pump housing. As for the other seal, it will come in a complete water pump kit if you get an OEM kit.

[chart]

i bought the OEM kit but it did not have that seal. I assume the plastic tube seats against that seal?

[chart]

more pics i see a grove in the seal does the plastic tube lip fit in this seal and is the brown o ring in the correct place? thanks for any help

[chart]

studying the pictures in the instructions and see that the grommet is supposed to be attached to the plastic tube. only thing that i am not sure about is that brown o ring when i took the pump off that grommet was not attached to the plastic tube and the o ring was were i put it in the plastic tube in the pic. but the instructions do not show one there. it is a 25" shaft if that makes a diff.

[Skools Out]

wow an OEM pump i hate to say it but next time buy a Sierra pump