Log in

View Full Version : Pad eyes for a bimini top. Where?


RidgeRunner
07-08-2010, 03:41 PM
I have some chrome plated zamak pad eyes on one of my boats. Therefore I have some pad eyes that need replacing. Problem is I cannot find the correct size in any material let alone stainless. I need to replace all four and the holes in the boat are 1 1/8" center to center. I have spent the past two hours searching the net and nothing. I prefer stainless but I would settle for exact replacements at this point. Anybody got a clue as to where to look?

tsubaki
07-08-2010, 04:54 PM
Naturally different names per mfr. Eye pads, eye straps, God knows what else.
See if you have looked here. Some are real close.



link didn't work.....

tsubaki
07-08-2010, 04:56 PM
Well poop!
Do a search for "eye straps", after entering the home page. And let us know if this is what you are looking for.
www.jamestowndistributors.com (http://www.jamestowndistributors.com)

RWilson2526
07-08-2010, 06:14 PM
http://www.marinepartdepot.com/newststdehi.html

These guys are pretty well priced but they dont give the c-c dimensions unfortunately

RidgeRunner
07-09-2010, 06:48 AM
Well poop!
Do a search for "eye straps", after entering the home page. And let us know if this is what you are looking for.
www.jamestowndistributors.com (http://www.jamestowndistributors.com)

Yes, that is the gem. I have tried them. The closest to what I have in size does not line up with the holes in the boat. Mine are 1 1/8" C2C
It appears that the top shop got a deal on some off size stuff.
I tried Suncor, Bosun's Supply (always great with the specifics), Wholesale Marine and about 20 others to no avail. I will try the top shop next. I did find some that were 1 1/16" but can't remember where??

RABBITFISH
08-13-2010, 09:00 AM
Not sure what part you mean by PAD EYES? I have had great success with west maring for parts. bring the old one and match it up.....

macojoe
08-13-2010, 02:51 PM
http://www.westmarine.com/1/1/16288-1-1-2-l-x-1-8-w-eye-strap-1-2-fairlead-width-1-1-8-hole-centers-two-8-rhms-fasteners.html


http://www.reddenmarine.com/marine-supplies.cfm/deck-hardware-eye-pads/sea-dog-corp-081104/stamped-stainless-steel-pad-eye-1-1-8.html


http://www.fastenal.com/web/products/detail.ex?sku=0578170


http://74.6.239.185/search/srpcache?ei=UTF-8&p=1+1%2F8+eye+straps&fr=yfp-t-701&u=http://cc.bingj.com/cache.aspx?q=1+1%2f8+eye+straps&d=4908559323304298&mkt=en-US&setlang=en-US&w=60dd3387,865a03d5&icp=1&.intl=us&sig=arwgFpeusLkKsQWGXY6BBA--

RABBITFISH
08-14-2010, 11:02 AM
Yeah, that's what I took it to mean, mine cost about 4 bucks a set for stainless, fit in the same screw holes. Even bought two extra sets, I have them all over the boat.

RidgeRunner
08-16-2010, 11:10 AM
Thanks all. Those links are great MJ. I was hoping to find the cast variety but the stamped will have to do. You guys are the best for all things boat related.