Transom cap

[Joker2]

I just finished my transom job. MY question is do I have to put a cap on it and if so what do I use? The transom isa 2-1/4" thick.

[Skools Out]

yes cap and seal it good

[Curapa]

Isn't it possible to just fiberglass over and leave the cap off? It seems to look a lot cleaner when done this way.

[Destroyer]

The cap is a protector. If the transom glass should develop a crack from the bouncing and flexing it gets the cap still keeps the water out, and it serves as a protector to a limited degree for things being dropped on the top of the transom.. Plus a clean topcap looks nice also... Since things cost money, and lots of things cost lots of money, I've found that if a manufacturer spends money to install something there's usually a reason for it.

[Joker2]

Yeah Curapa I put three layers of glass and plenty of resin on the top of transom already, I was thinking the same as you but it does make sense what destroyer is saying. I just don't know where to get it made so it will fit my thickness?

[RWilson2526]

Look around online or in your phone book for a local sheetmetal shop. Pay them a visit in person late in the day when everyone is in a good mood with your dimensions...they'll probably bend you one up while you wait and charge you maybe $20 bucks...Not sure where you are located but if you are in NJ send me a pm and I can get you something.

[NOTHING ELSE MATTERS]

You can also use vinyl siding corner piece. When i did mine, i wrapped it with glass and paint it different color so looks like a cap but fully waterproof.
http://i248.photobucket.com/albums/gg199/giorgosc/1990%20V-20/IMG_0080.jpg

[Skools Out]

Yeah when i said needs cap that means you need something on top to seal it up. i usually use 4 layers of glass over all mine.

[reodds]

You can also use vinyl siding corner piece. When i did mine, i wrapped it with glass and paint it different color so looks like a cap but fully waterproof.
http://i248.photobucket.com/albums/gg199/giorgosc/1990%20V-20/IMG_0080.jpg

Great idea! It looks fantastic, is waterproof, and won't corrode!

[Stinky_Hooker]

I glassed mine completly on the 18 and LOVE it. I highly reccomend it for a one time fix and clean look.

[Skools Out]

here's one that was glass capped and painted on one of my projects

http://i8.photobucket.com/albums/a46/Skools_Out/Monoco%2021/21Boat-224.jpg


http://i8.photobucket.com/albums/a46/Skools_Out/Monoco%2021/MVC-012S.jpg


if you want to see that boat project here's a link


part 1

http://www.wellcraftv20.com/community/showthread.php?t=5978

part 2

http://www.wellcraftv20.com/community/showthread.php?t=5461

last part

http://www.wellcraftv20.com/community/showthread.php?t=5669

[Chomper]

I glassed mine when I re-did the transom and brought it up to a 25, It was my first glassing job. It wasn't perfect but heck you gotta start somewhere and it is not so bad and the fish don't mind.

http://i465.photobucket.com/albums/rr14/kvmay/P4040026.jpg

[nymack66]

Did you use a composite core for the re-do ? If you did heck don't cap it, per Skool and the Guy's here I did not cap mine looks great to this day..
Only problem is my neighbour cat crawls in to sleep during the night when it rains and could see a few claw marks on it .. I love cats so she is excused ...

[Joker2]

No I used layers of marine ply and West resin with 17 oz. bidirectional cloth backed with 3/4 oz glass mat

[Joker2]

I'll post pics soon

[nymack66]

No I used layers of marine ply and West resin with 17 oz. bidirectional cloth backed with 3/4 oz glass mat

I will say you need to cap it , Have a local metal shop bend u a cap and seal is good, most if not all none composite transom this is the number one spot for moisture and rot ..

[Joker2]

Thanks for your input

[captpete13]

I used plywood and west in my transom. I glassed my cap and it turned out pretty good.